Water Damage Restoration – A Brief Preview

It is the procedure of repairing a home or property to its pre loss condition. Harm to the property could be as a result of an overflow, flood or some other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the procedure and completion of the process. You will find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage due to water guide is the benchmark tool that is utilized by companies that specialize in restoration of water damage. sewage cleanup Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the very first and the most important part of water damage restoration. The assessment must be correct so an appropriate response can be taken. In restorating the damage due to water, technicians and the insurance companies must come together and understand what is damaged and just how to start restoring the damage. Identifying the source of the damage, documentation of damage, and accurate estimates are mandatory for an effective water damage restoration. Categorization is based on the contamination degrees of the water source. The categories are listed below

Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – This is water that has some contaminants like water from the dishwasher, washing machine or toilet with urine.

Category 3 – This is water that is highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

After the evaluation is complete, the procedure of drying and decontaminating begins at the site. Based on the extent of damage, damage caused due to water can be classified into 4 types. Class 1 Damage- When loss is fixed to a small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage is to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination must be performed if contamination has been detected in the area. Decontamination may be performed for your area or in specific pockets where contamination has been detected.

Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *